B-Band A6.2 XOM (DISCONTINUED PRODUCT)

The B-Band A6 was the first preamp to initiate a flexible design that used a UST and AST bringing control over the sound from the heart of a guitar. Now with the updated XOM* process the A6.2 pristinely and clearly captures the true character of a guitar's unique voice like no other system before it.

Similar to pro audio hardware the dual inputs of the A6.2 has separate gain trims, at the faceplate for easy access, to guarantee wide dynamic range and enable signal matching of the UST / AST combination. For total sound control and ease of use smooth slider controls are used at the 3-band EQ, XOM mix and master volume. The volume control is at the leading edge of the faceplate and the XOM mix control is at a right angle to this for easy use when not viewing.

Set aside from the from the master control section, for easier application, is the Notch Depth and Notch Frequency rotary controls and a phase switch for feedback suppression, plus a low battery LED.

The A6.2 is an active preamp that is 9-volt battery powered. A robust high quality pre-wired endpin jack handles the mono XOM mix output signal.

The A6.2 kit comes complete with all hardware for installing including the endpin jack and a hold-tight battery holder. For quicker battery changes an optional side mount battery box is available.

* Read more about how XOM delivers big, natural tone.

A6.2 Features:

• XOM process
• Dual input (UST / AST only)
• Dual input gain trims
• 3-band EQ
• Notch Depth and Frequency controls
• Phase switch
• Battery status LED
• Pre-wired high quality endpin output jack
• Average battery life 150 hours

A6.2 Specifications:

• S/N ratio: Greater than -90 dB
• Distortion: 0.05 %
• Frequency response (both channels): 50 Hz - 40 kHz (-3 dB)
• Output impedance: < 3.5 kohm
• Nominal output level: -10 dB u (0.245 V_rms)
• UST channel input impedance: 50 Mohm
• AST channel input impedance: 50 Mohm
• UST channel voltage gain: 0 - +24 dB
• AST channel voltage gain: 0 - +24 dB
• Bass control range: Shelving ±12 dB @ 100 Hz (±3 dB @ 330 Hz)
• Middle control range: Peaking ±11 dB @ 1.1 kHz (Q = 0.5)
• Treble control range: Shelving ±12 dB @ 12 kHz (±3 dB @ 3.5 kHz)
• Notch frequency range: 100 Hz - 330 Hz
• Notch depth range: -15 dB; Q 3.3
• Power supply: 9 V battery (not included)
• Current consumption: 4 mA typical
• Connections: Transducer inputs, 2.54 mm / .10" header; Output, 6.3 mm / 1/4" jack
• Weight (with accessories): 140 g
• Dimensions: H 42 mm / 1.65", W 56 mm / 2.20", L 61 mm / 2.40"

Order Code:

• A6.2

Options:

• Side mount battery box (Order code: SMB)

Buy online